Mesh-Belt Drier Machine DW 1.2-8

 

Specification :

Unit Number : 4
Belt Width : 1.2 m
Drying Section Length : 8 mm
Thickness of The : 10 – 80 mm
Material To Be Covered
Temperature : 60 – 130℃
Steam Pressure : 0.2 – 0.8 Mpa
Steam Consumption : 120 – 300 kg/h
Drying Time : 0.2 – 1.2 h
Drying Strength : 60 – 160 kg H20/h
Total Power of : 9.9 kw
The Blower
Total Power of : 11.4 kw
The Equipment

Product Description

Main Application :
The machine is suitable for drying the material in pharmaceutical chemical foodstuff, elastic gum, electronical industries dewatering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material , small wooden product, plastic product, aging and solidification for the electronic component and device.

Working Principle :
The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60mesh stainless steel wire net and it is drawn and moved inside the direr by a transmission device. The drier is composed of several units, the hot air is circulated separately.Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve.The hot air passes through the meshbelt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring will fall into the material collector continuously. The top nand low circulation units can freely equipped according to the users demand. The unit can be selected according to be demand.

Features :
This machine is flowing and continuous type drying equipment firstly made by our factory. The machine is used for drying the piece, tape and particle state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of traditional Chinese medicine and others, for which the water content rate is high and the high temperature is not allowed . The machine owns the advantages, that its drying speed is fast,the evaporation strength is high and the product quality is good . The dewatering filtering cake state paste material, after the particle makeing or bar making, can be dried also.

 

Specification :

Unit Number : 4
Belt Width : 1.2 m
Drying Section Length : 8 mm
Thickness of The : 10 – 80 mm
Material To Be Covered
Temperature : 60 – 130℃
Steam Pressure : 0.2 – 0.8 Mpa
Steam Consumption : 120 – 300 kg/h
Drying Time : 0.2 – 1.2 h
Drying Strength : 60 – 160 kg H20/h
Total Power of : 9.9 kw
The Blower
Total Power of : 11.4 kw
The Equipment

 

Untuk pengiriman diluar jakarta, kami bisa membantu mengirimkan melalui ekspedisi yang lebih murah seperti :
– Pahala ekspress
– Dakota
– Dll.

Silakan pilih ekspedisi yang tersedia atau dapat langsung berdiskusi dengan kami untuk pengiriman menggunakan ekspedisi lainnya.
Dan Kami juga menyediakan Service mesin dan Menjual Sparepart Mesin yang Bapak/Ibu butuhkan.
Untuk informasi lebih lanjut dapat menghubungi kami di :
Telp / WA CS1 : +6287881236547

There are no reviews yet.

Be the first to review “Mesh-Belt Drier Machine DW 1.2-8”